Quartz
Quartz in Lebanon: the low-maintenance surface for modern kitchens
Engineered quartz has become one of the most popular choices for kitchen countertops, bathroom vanities and tabletops. It combines the look of natural stone with a consistent, non-porous surface that is easy to keep clean.
Since 1982, Traboulsi Ceramica has helped homeowners across Lebanon choose surfaces that last. This guide explains how these slabs are made, the designs shown above and how to look after them.

How engineered stone is made
These countertops are manufactured. Crushed natural mineral, typically 90 to 95 percent of the material, is blended with resins and pigments, compacted and cured, as LX Hausys explains. The result is a dense surface with a predictable color and pattern from slab to slab.
Because the pattern is controlled, long kitchen runs, islands and matching backsplashes look consistent, and seams are usually less noticeable than on natural stone.
Designs in our collection
- Calacatta Venezia and Calacatta Veneto: white surfaces with soft, marble-style veining.
- Kashmera White: a clean, bright white for minimalist kitchens.
- Marquina: black with dramatic white veins, inspired by Nero Marquina marble.
- Aizano and Classic: versatile designs for kitchens, bathrooms and furniture.
Where to use it
- Kitchen countertops and islands: the surface resists stains, making it ideal for busy family kitchens.
- Bathroom vanities: a seamless, hygienic surface that is simple to wipe clean.
- Tables and furniture: consistent slabs suit waterfall edges and matching pieces.
- Backsplashes and wall cladding: continue the countertop up the wall for a clean, continuous look.
- Offices and shops: reception desks and counters that stay smart with minimal upkeep.
Finishes and edges
Polished surfaces are glossy and bright, while matt or honed finishes feel softer and show fewer reflections. Edge profiles range from crisp square edges to softer rounded ones, and a mitered edge can make a slab look thicker for a more dramatic island.
Caring for the surface
This surface never needs sealing, and warm soapy water is enough for daily cleaning. Avoid strong chemicals and solvents, and protect it from direct heat: Caesarstone, for example, advises always placing hot cookware on trivets and hot pads. Indoor engineered stone is also best kept out of intense, direct sunlight.
Engineered or natural stone?
Choose an engineered surface if you want easy care and a consistent look. Natural granite and marble offer one-of-a-kind patterns and, in the case of granite, better heat and sun resistance. Our guide to quartz vs granite countertops compares them in detail, and our overview of kitchen countertops in Lebanon covers marble and ceramic slabs too.
Made-to-measure surfaces
The quality of a countertop depends on its fabrication: precise templates, neat seams, polished edges and accurate cut-outs. Learn why countertops should be factory-fabricated and discover our factory and custom fabrication.
Common mistakes to avoid
- Placing hot pans, grills or portable burners directly on the surface.
- Using standard indoor slabs on a sunny terrace or outdoor kitchen.
- Cleaning with harsh solvents or abrasive pads.
- Leaving seam positions to chance on a long run or island.
Quartz buying checklist
- Choose a design and finish that suit your cabinets, floor and lighting.
- Confirm your sink, hob and tap models before templating.
- Decide on edge profiles, backsplash height and any waterfall ends.
- Plan seams with your fabricator, especially on long runs and islands.
- Keep trivets near the hob and oven from day one.
Frequently asked questions
Is it heat resistant?
The mineral content tolerates heat, but the resin binder does not, so a pan straight from the hob or oven can leave a mark. Always use trivets and hot pads, as manufacturers recommend.
Can it be used outdoors?
Standard indoor slabs are not recommended for outdoor kitchens or spots with intense, direct sunlight, because UV light can change the color over time. Ask our team about surfaces suited to outdoor use.
Does it stain?
The surface is non-porous, so liquids stay on top instead of soaking in. Wipe up oil, wine, coffee and spices promptly and it will stay looking new.
Can I match the island, countertop and backsplash?
Yes. Because the pattern is consistent, the same design can run across countertops, islands, backsplashes and even waterfall ends for a seamless kitchen.
See our quartz in person
Photos can only show so much. Visit Traboulsi Ceramica in Jdeideh, on Pierre Amin Gemayel Street, or in Amchit, on the Jbeil Highway, to see the materials up close, compare finishes in natural light and get advice for your project. You can also browse the full catalogue or contact our team before your visit.










